PH-CCW1 ♥ Replacement Parts – PU-047040 – England Stove Works Pellet Stove Auger Feed Gearbox Motor

NA - We guarantee 100% correct fit and function. Fits models: ~ 25-pdv ~ 25-pdvc ~ 25-pi ~ 25-paf ~ 25-pdvp ~ 55-shp10 ~ 55-shp10l ~ 55-shp20 ~ 55-trp10 ~ 55-shp22 ~ 55-shp22l ~ 55-trp15 ~ 55-trp22 ~ shp25 ~ 55-trp25 ~ american heritage ~ american standard ~ us 25-5670 ♥♥♥ *NOTE: Correct replacement for the upper and lower auger/drive motors in the above mentioned models.

Connection wires will plug in directly into wire leads; doesn't matter which wire connects to which lead. 1 rpm, counter clockwise rotation when facing shaft ~ 120 v, 60 hz, 1.03 amps ~ 3/8" diameter x 1" length Shaft - Flat Edge of Shaft for Securing with Set Collar. Wire leads measure 20" in length. This motor has wire leads for electrical connection instead of leads directly on the motor.

PH-CCW1 ♥ Replacement Parts - PU-047040 - England Stove Works Pellet Stove Auger Feed Gearbox Motor - . Note: this motor runs cooler than the original and does not have or require the rear plastic cooling fan. Exclusive 1 Year warranty with our no hassle replacement guarantee. We include both male and female spade connectors depending on your stoves configuration. Gearbox measures 2 ¾" wide x 4 5/8" high x 1" width width to screw mount hole 1 5/16" Total width including magnet, armature and gearbox measures 2 1/8".

Highest durability and lowest Operating Decibels - Exceeds all OEM & aftermarket motor standards.





3/4" Mounted Bearing UCF204-12 + Square Flanged Cast Housing

VXB - This ucf204-12 bearing has a cast iron flange housing, four bolt holes, and a 3/4" inside diameter. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. The bearing has a dynamic radial load rating of 12. 8 kn and a static axial load rating of 6. 65 kN. Available in a variety of materials and mounting configurations, they can have an extended inner ring and locking device, mounted bearings can be one- or two-piece, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris.

It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.

3/4" Mounted Bearing UCF204-12 + Square Flanged Cast Housing - Mounted bearings combine a bearing mounted inside a housing unit. Cast iron f204 flange block housing increases life of the bearing. Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. This ready-to-mount unit requires four 3/8" mounting bolts sold separately. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing.





Lynn Manufacturing Replacement Englander Pellet Stove Auger Bearing Gasket PU-ABG

Lynn Manufacturing - 3/4" inside diameter fits conventional cylindrical shafts. Cast iron f204 flange block housing increases life of the bearing. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. Set screw prevents shaft slippage. Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds.





Top and Bottom Auger Motor - Englander Pellet Stove 1RPM Auger Motor PU-047040 / PH-CCW1 England Stove Works auger/feed motor

Pellethead PU-047040 - Full 1 Year Warranty. Improved easy install with 12" Wire Leads! Highest durability and lowest operating decibels - exceeds all OEM & aftermarket motor standards ~ Exclusive 1 Year warranty with our no hassle replacement guarantee ~ Made in China - Top Tier Manufacturer. 3/4" inside diameter fits conventional cylindrical shafts.

England stove works auger Motor - Correct Replacement for Top and Bottom motor. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. Free fast shipping - Guaranteed Best Price. Gearbox measures 2 ¾" wide x 4 5/8" high x 1" width width to screw mount hole 1 5/16" Total width including magnet, armature and gearbox measures 2 1/8".

Top and Bottom Auger Motor - Englander Pellet Stove 1RPM Auger Motor PU-047040 / PH-CCW1 England Stove Works auger/feed motor - Earth sense has invested extensive testing and time to insure the quality of this replacement motor is equal to or better than the OEM motor. Set screw prevents shaft slippage. Connection wires will plug in directly into wire leads; doesn't matter which wire connects to which lead. Cast iron f204 flange block housing increases life of the bearing.

This motor has wire leads for electrical connection instead of leads directly on the motor. 1rpm 110 v, 60 hz, 1.





Englander Pellet Stove Auger Bearing PU-UCF204-12

- 3/4" inside diameter fits conventional cylindrical shafts. Fits the following englander models: 25-pdvc / 55-trp15 / 55-shp15 / 55-shp22 / 25-pdve / 55-shp10l / 55trp10 25-pdv / 55-shp22l / 55-trp22 / 25-pdvp / us 25-5670 25-pi / 55-shp10 / 55-shp20 / 55-trp20 25-paf/ 55-shp25/ 55-trp25 25-PFS/ 25-PFSP Cast iron f204 flange block housing increases life of the bearing.

Englander Pellet Stove Auger Bearing PU-UCF204-12 - Improved easy install with 12" Wire Leads!3/4" bore. Set screw prevents shaft slippage. Full 1 Year Warranty. Price listed is for one piece two pieces are needed for each stove, one per auger. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds.

Free fast shipping - Guaranteed Best Price. Auger bearing block bearing for all Englander pellet units. 1rpm 110 v, 60 hz, 1. 03 amps. England stove works auger Motor - Correct Replacement for Top and Bottom motor.





Fast!! - Englander Pellet Stoves Igniter Replacement 300W 2004+ PU-CHA

Tempco PU-CHA /AMP-CIENG - 300 w 120v ac. Igniter for Englander Pellet Stoves. Set screw prevents shaft slippage. Improved easy install with 12" Wire Leads! Englander pellet stove igniter - best avaILABLE! Fits Models: All Englander models 2004 to current manufacturer date. Part numbers: ~ pu-cha / ph-cieng specs: ~ 300w, 120v ~ 3/8" diameter x 4 3/4" length ~ top of the Line - Exceeds all aftermarket & OEM standards ~ Exclusive 1 Year warranty with our no hassle replacement guarantee ~.

Fast!! - Englander Pellet Stoves Igniter Replacement 300W 2004+ PU-CHA - Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. 3/4" inside diameter fits conventional cylindrical shafts. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. Full 1 Year Warranty. 3/8" diameter x 4 3/4" Length. 1rpm 110 v, 60 hz, 1. 03 amps. England stove works auger Motor - Correct Replacement for Top and Bottom motor.

Free fast shipping - Guaranteed Best Price. Igniter for fits models: 25-pdv, 55shp20, 25-paf, shp25, 55-shp22l, 25-pdvt, 55-trp10, 55-trp15, 55-shp22, 55-shp10, 55-shp10l, 25-pdvp, 55-trp22, 25-pdvc, 25-pi, 55-trp25 Cast iron f204 flange block housing increases life of the bearing.





Englander Pellet Stove Bottom Auger Shaft Replacement 11" Englander Part Number PU-AF11B

PU-AF11B - Note: for models 1992-2000, and other than 25-pdvc, 55-shp10 or 55-TRP10 order Part Number PU-AF12B. 300 w 120v ac. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. Bottom auger for all: 25-pdv, 55-trp22, 55-shp15, 55-shp22 and 55-shp22l, 25-pdvp, 55-trp15, american heritage and us 25-5670 Parts | 25-PI, 55-SHP20 and 55-TRP20 Parts.

Cast iron f204 flange block housing increases life of the bearing. 3/8" diameter x 4 3/4" Length. Free fast shipping - Guaranteed Best Price. England stove works auger Motor - Correct Replacement for Top and Bottom motor. 1rpm 110 v, 60 hz, 1. 03 amps. Set screw prevents shaft slippage. 1 year Warranty. Improved easy install with 12" Wire Leads!

Englander Pellet Stove Bottom Auger Shaft Replacement 11" Englander Part Number PU-AF11B - Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. 3/4" inside diameter fits conventional cylindrical shafts. Full 1 Year Warranty. Igniter for Englander Pellet Stoves.





Englander Igniter, England Stove Works Igniter 2004+ PU-CHA

ESESStoves PU-CHA / PH-CIENG - Igniter for Englander Pellet Stoves. 300 w 120v ac. Igniter for Englander Pellet Stoves. 1rpm 110 v, 60 hz, 1. 03 amps. 1 year Warranty. Improved easy install with 12" Wire Leads! Set screw prevents shaft slippage. Englander pellet stove igniter - best avaILABLE! Fits Models: All Englander models 2004 to current manufacturer date.

3/8" diameter x 4 3/4" Length. Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. Igniter for fits models: 25-pdv, 25-pdvt, 25-pi, 55-trp22, 55-shp10, 55shp20, 55-trp10, 55-trp15, 25-pdvp, 55-shp22, 25-paf, 25-pdvc, 55-shp10l, 55-shp22l, shp25, 55-trp25 Cast iron f204 flange block housing increases life of the bearing.

Englander Igniter, England Stove Works Igniter 2004+ PU-CHA - Part numbers: ~ pu-cha / ph-cieng specs: ~ 300w, 120v ~ 3/8" diameter x 4" length ~ top of the Line - Exceeds all aftermarket & OEM standards ~ Exclusive 1 Year warranty with our no hassle replacement guarantee. 3/4" inside diameter fits conventional cylindrical shafts. Free priority shipping - No Minimum from ESESStoves.

300 w 120v ac. Free fast shipping - Guaranteed Best Price. Full 1 Year Warranty. England stove works auger Motor - Correct Replacement for Top and Bottom motor.





Englander VACUUM SHUT DOWN SWITCH, CU-VS

- Igniter for Englander Pellet Stoves. If an operational error occurs in the unit, a switch will either stop the top feed auger or shut the unit off; if the unit turns off an E-1 Code error code will appear in the Heat Range and Blower Speed windows of the Control Board. 1 year Warranty. This part is used in 2006 and later model pellet stoves.

3/8" diameter x 4 3/4" Length. This is the "door ajar switch. The vacuum hose from this switch connects directly to the firebox of the stove. This part is used in 2006 and later model pellet stoves. The vacuum shut down switches part # PU-VS and CU-VS help control various functions of the unit. Set screw prevents shaft slippage.

Englander VACUUM SHUT DOWN SWITCH, CU-VS - 300 w 120v ac. Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. 3/8" diameter x 4 3/4" Length. This is the "Door Ajar Switch. The vacuum hose from this switch connects directly to the firebox of the stove. Free fast shipping - Guaranteed Best Price. Improved easy install with 12" Wire Leads!





Rotom HB-RBM120 Pellet Stove Blower Motor Replacement 1/60 hp, 3000 rpm, 0.3 Amp., 115V

ROTOM Rotom - HB-RBM120 - Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. Suggested replacement reference for: whitfield - quest 12026011, 702111469, j238-150-1518, 7021-8786, 7021-11469, j238-112-11226, 119289-00, 13656011, travis avalon & lopi, breckwell, 10-1111 g, fasco 7021-9129, j238-150-15288, 7121-7001, Quadra-fire, 076002b.

Rotom HB-RBM120 Pellet Stove Blower Motor Replacement 1/60 hp, 3000 rpm, 0.3 Amp., 115V - 1rpm 110 v, 60 hz, 1. 03 amps. Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. 300 w 120v ac. These are designed to be replacements for the listed blower model number. 300 w 120v ac. 3/8" diameter x 4 3/4" Length. If the motor does not say Rotom Canada, it is counterfeit. Shaft: 5/16" x 1 7/8", rotation = cw facing shaft, sleeve bearings.

Be sure to compare the dimensions listed, to your unit, to be sure it will fit. Cast iron f204 flange block housing increases life of the bearing. The blowers are aftermarket models-not original equipment. Free fast shipping - Guaranteed Best Price. Igniter for Englander Pellet Stoves.





Englander Pellet Stove Top Auger Shaft Replacement 6" Englander Part Number PU-AF6T

PU-AF6T - Uc204-12 chrome steel bearing for efficient operations at a wide range of speeds. Improved easy install with 12" Wire Leads!300 w 120v ac. Igniter for Englander Pellet Stoves. 3/4" inside diameter fits conventional cylindrical shafts. 300 w 120v ac. This part is used in 2006 and later model pellet stoves. Whitfield-quest, quadra-fire, breckwell, travis avalon & lopi, fasco 7021-9129.

Englander Pellet Stove Top Auger Shaft Replacement 6" Englander Part Number PU-AF6T - Fan: 4. 75" diameter, mounting plate: 5. 75", bolt hole centers: 5 3/8". Dynamic radial load rating of 12. 8 kn and static axial load rating of 6. 65 kN. This is the "door ajar switch. The vacuum hose from this switch connects directly to the firebox of the stove. England stove works auger Motor - Correct Replacement for Top and Bottom motor.

1 year Warranty. 3/8" diameter x 4 3/4" Length. 3/8" diameter x 4 3/4" Length. Full 1 Year Warranty. Cast iron f204 flange block housing increases life of the bearing.