Polyamide Thin-Film Composite. The 33001071 membrane is yellow with a red band. 9 gpd reverse osmosis membrane. The hydrotech 33001071 is a replacement reverse osmosis membrane for the Hydrotech 1230, 1020, 1240, and 1030 series RO systems. Fits hydrotech 1230, 1240, 1020, and 1030 series RO systems. Yellow with a red band.

It provides consistent and reliable performance, is made from polyamide thin-film composite, and will produce 9 gallons per day.

Hydrotech 41400008/41400009 Replacement Reverse Osmosis Water Filter Cartridge Set

This hydrotech reverse osmosis replacement filter pack includes 1 sediment filter model 41400008 and 2 carbon filters model 41400009. Fits hydrotech 1010, 1030, 1230, 1020, and 1240 series systems. Does not contain a replacement RO membrane. This pack includes the 3 filters that need to be replaced regularly in a 4 stage Hydrotech RO system.

Pack of 3 filters for Hydrotech RO systems. Contains 1 sediment filter and 2 carbon filters. It does not include a replacement RO membrane, just sediment and carbon filters.

Original Hydrotech RO Reverse Osmosis Water Filters Cartridges Set 3-Pack New

If you're not getting enough product water you should replace the pre-filter cartridges to maintain optimal system performance. Fits hydrotech 1010, 1020, 1030, 1230, and 1240 series systems. Does not contain a replacement RO membrane. The hydrotech carbon prefilter 41400009 is the genuine replacement filter cartridge for a wide variety of Hydrotech RO systems, including the 1240 Series, M & Pro Systems, HT101, E, HT102, HT103 and HT123 Series Systems.

Cost effective 41400009 filter fits hT and HTF Series Reverse Osmosis Systems, Blue End Caps. Contains 1 sediment filter and 2 carbon filters. Replace every 6 months, or as needed Pack of 3 filters for Hydrotech RO systems. 41400009. 41400008. The hydrotech 41400008 is the original factory replacement sediment filter for the Hydrotech HT, 101, HTF, and 103 series reverse osmosis drinking water systems.

Removes chlorine, Taste and Odor. It effectively removes dirt, and rust, and particles to protect the more expensive filters in your system. This filter is a vital component of your multi-stage reverse osmosis RO system and should be replaced once every 6 months, or sooner if you have particularly hard water.

.

Hydrotech 41400009 10 Micron Carbon Block Replacement Filter

The hydrotech 41400009 is a 10 micron carbon block filter for use in Hydrotech reverse osmosis systems. It fits in the hydrotech 1010, 1230, 1030, 1020, and 1240 series RO systems. The 41400009 has blue end caps and replaces the discontinued 41400075 model. Fits hydrotech 1010, 1030, 1020, 1230, and 1240 series systems.

Does not contain a replacement RO membrane. Pack of 3 filters for Hydrotech RO systems. 41400008. Replaces the discontinued 41400075 model. Micron rating: 10 microns. Alternate hydrotech part numbers are S-FS-19, SFS19, SFS-19. Fits hyrdrotech 1230 and 1240 RO systems. Contains 1 sediment filter and 2 carbon filters.

41400009. Carbon block filter for Hydrotech reverse osmosis systems.

Hydrotech 41400008 String Wound Sediment Replacement Filter

Micron rating: 10 microns. Goes in the first stage of Hydrotech multi-stage RO systems. Fits hyrdrotech 1230 and 1240 RO systems. Effectively reduces sediment, dirt, and rust. 41400008. Fits hyrdrotech 1230 and 1240 RO systems. 41400009. Carbon block filter for Hydrotech reverse osmosis systems. The hydrotech 41400008 is a string wound sediment filter for Hydrotech reverse osmosis systems.

. Replaces the discontinued 41400075 model. Alternate part number: s-FS-02 Pack of 3 filters for Hydrotech RO systems. It effectively removes sediment and particulates from water to protect the more sensitive and expensive filters in your multi-stage RO system. Sediment pre-filter protects other filters in system.

Fits hydrotech 1230, 1030, 1020, 1240, 1010, and 1040 series RO systems. Contains 1 sediment filter and 2 carbon filters. It should be replaced every 6 months or when the flow rate decreases, whichever comes first. Polypropylene string wound filter. Fits hydrotech 1010, 1020, 1030, 1230, and 1240 series systems.

Does not contain a replacement RO membrane.

Hydrotech 21401003 Filter Wrench HT-HTF

Replaces the discontinued 41400075 model. Specifically designed for use with hydrotech filter systems. Genuine oem product. Fits hyrdrotech 1230 and 1240 RO systems. Micron rating: 10 microns. You should only use the filter wrench to loosen the sump; over tightening the housing sump can damage the O-rings and make opening the housing more difficult to open later.

Fits hyrdrotech 1230 and 1240 RO systems. Effectively reduces sediment, dirt, and rust. 41400008. Fits hydrotech 1010, 1030, 1020, 1230, and 1240 series systems. Does not contain a replacement RO membrane. Goes in the first stage of Hydrotech multi-stage RO systems. 41400009. Sediment pre-filter protects other filters in system.

Perfect for loosening a stuck filter housing. Polypropylene string wound filter. The hydrotech 21401003 filter wrench is the perfect tool to help loosen a stuck filter housing and makes changing the filter quick and easy. Makes filter change outs fast and easy. Carbon block filter for Hydrotech reverse osmosis systems.

Original Hydrotech Replacement RO Reverse Osmosis Water Filters Cartridges Set

Housing wrenches should only be used to loosen the sump, do not tighten the housing sumps using the wrench. Effectively reduces sediment, dirt, and rust. Micron rating: 10 microns. Sediment pre-filter protects other filters in system. 41400009. Goes in the first stage of Hydrotech multi-stage RO systems. Specifically designed for use with hydrotech filter systems.

Fits hydrotech 1010, 1030, 1230, 1020, and 1240 series systems. Does not contain a replacement RO membrane. Fits hyrdrotech 1230 and 1240 RO systems. Carbon block filter for Hydrotech reverse osmosis systems. Polypropylene string wound filter. 41400009. The hydrotech 41400008 is the original factory replacement sediment filter for the Hydrotech HT, HTF, 101, and 103 series reverse osmosis drinking water systems.

Replaces the discontinued 41400075 model. Makes filter change outs fast and easy. 41400008. Fits hyrdrotech 1230 and 1240 RO systems. If you're not getting enough product water you should replace the pre-filter cartridges to maintain optimal system performance.