The mounting hole is at approximately the 2:00 O' Clock position with the sensor sitting on a flat surface with the bend pointing to the left. This flame sensor is the direct replacement for many Carrier, Payne, Bryant, and Day & Night gas furnaces. Bent flame sensor - 73 Degree Bend Angle. Ceramic length 1-1/2".

Duralight Two Year Replacement Warranty. This flame sensor replaces carrier bryant payne day & night part numbers LH680012, LH33WZ511, LH680014, LH33WZ515, and LH33WZ517. Contact the authorized Duralight dealer that you purchased the part from for details. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement.

Please see photos to reference flame mounting hole position. 1/4" male quick connect Terminal with 4-3/4" Wiring Harness. Original equipment manufacturer's brand names and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

Direct replacement for carrier - bryant - day & night - payne part numbers lh680534, LH33WZ515, LH680014, lh680012, LH33WZ511, and LH33WZ517. This part is covered by the exclusive Duralight two year limited replacement policy.

Duralight Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004

If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. This part is covered by the exclusive Duralight two year limited replacement policy when purchased through an authorized Duralight dealer. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick.

. The heating element portion of the ignitor is 2-1/4" long. Original equipment manufacturer's brand names and part numbers are used for identification purposes only. Duralight Two Year Warranty. This item is sold for professional installation only in accordance with all local, state, and national codes and licensing requirements.

This ignitor is the replacement for carrier bryant payne day & night part numbers LH33ZS001, LH33ZS003, LH33ZS002, and LH33ZS004. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. There are locating ridges on all four corners of the ceramic block.

This ignitor is the "wide" style used on many Carrier, Payne, Bryant, and Day & Night gas furnaces. Direct replacement part for Many Carrier, Payne, Bryant, and Day & Night Furnaces. Includes two Hi Temp Ceramic Wire Nuts.

Carrier OEM Furnace Limit Switch L215 - HH18HA416

Duralight Two Year Warranty. Limit switch 215 Deg. Direct replacement part for Many Carrier, Payne, Bryant, and Day & Night Furnaces. Includes two Hi Temp Ceramic Wire Nuts. F, m/r made in USA. Replaces part numbers: lh33zs001, lh33zs002, lh33zs003, and LH33ZS004. China.

OEM Upgraded Replacement for Carrier Furnace Hot Surface Ignitor/Igniter 41-409 Original Version

This is a brand new oEM Furnace Hot Surface Ignitor. This is a brand new OEM Furnace Hot Surface Ignitor. Direct replacement part for Many Carrier, Bryant, Payne, and Day & Night Furnaces. Includes two Hi Temp Ceramic Wire Nuts. Duralight Two Year Warranty. Made in USA. Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004.

China.

KYOCERA LH33ZG001 HOT SURFACE IGNITER

Item: hot surface ignitor fits Brand: Carrier For Use With: Universal Made in USA. Duralight Two Year Warranty. Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004. China. This is a brand new OEM Furnace Hot Surface Ignitor. Japan. Direct replacement part for Many Carrier, Payne, Bryant, and Day & Night Furnaces.

Includes two Hi Temp Ceramic Wire Nuts.

Honeywell HZ311 TrueZONE Panel

Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004. China. Direct replacement part for Many Carrier, Payne, Bryant, and Day & Night Furnaces. Includes two Hi Temp Ceramic Wire Nuts. Heat pump compatible: no; compatible with Sensor: Discharge Air Temperature Sensor Made in USA. Smaller Footprint.

. Truezone hz311 panel for conventional, single stage applications up to 3 zones 1H/1C. Clean, Professional Installation. Common-Sense LEDs. This is a brand new OEM Furnace Hot Surface Ignitor. Japan. Variable-Speed Fan Control. Robust Push Terminals. Duralight Two Year Warranty.

Rheem 62-23543-01 Flame Sensor Rod for Rheem, Ruud and Weatherking Furnaces

Angle sensor offset degrees: 90 Clean, Professional Installation. Length - mounting flange To Sensor Tip Inches: 2-1/2. Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect.

Duralight Two Year Warranty. Smaller Footprint. Made in USA. Common-Sense LEDs. Robust Push Terminals. 62-23543-01 flame Sensor. Replaces part numbers: lh33zs001, lh33zs002, lh33zs003, and LH33ZS004. China. Length mounting flange to sensor tip: 2. 5 inch. This is a brand new OEM Furnace Hot Surface Ignitor. Japan. Direct replacement part for Many Carrier, Bryant, Payne, and Day & Night Furnaces.

Includes two Hi Temp Ceramic Wire Nuts. The model number and name for the following item is: Neuco Inc. This is a genuine replacement part.

Part # PFS014 Furnace Electrode Flame Sensor for Carrier Bryant LH33WZ511 LH33WZ515

Smaller Footprint. Length - mounting flange To Sensor Tip Inches: 2-1/2. Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect. Genuine factory oem original for proper fit, easy installation and reliability.

Common-Sense LEDs. Robust Push Terminals. Clean, Professional Installation. Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004. China. Duralight Two Year Warranty. This igniter is a replacement for carrier, bryant, payne LH33WZ511, LH33WZ515, LH680012, LH680014. Flame sensor for Hot Surface Ignition H.

S. I. Systems can be mounted remotely on multiple burners or adjacent to igniter on other applications for use with spark ignition and flame sensing high quality alumina ceramic insulator high temperature kanthal flame rod material that can withstand 1800°F Features 45 Degree For use with Carrier LH33ZS004 igniter Used on these Bryant & Carrier models: 330AAV, 58DXC, 330JAV, 58SXC, 333BAV, 58DHC, 58SSC, 333JAV, 58PAV, 398AAV, 58TUA and 58WAV Made in USA.

This is a brand new OEM Furnace Hot Surface Ignitor. Japan.

Hot Surface Ignitor

Length - mounting flange To Sensor Tip Inches: 2-1/2. Angle - sensor Offset Degrees: 90 Ordering notes: the gas code is the first two letters of the unit's serial number. Length - sensor offset Inches: 1-9/16. Termination: 1/4 Inch Male Quick Connect. Genuine factory oem original for proper fit, easy installation and reliability.

B>price for: Each. Length mounting flange to sensor tip: 2. 5 inch. Clean, Professional Installation. Smaller Footprint. Angle sensor offset degrees: 90 Termination: 1/4 inch male quick connect. Duralight Two Year Warranty. Common-Sense LEDs. Robust Push Terminals. Variable-Speed Fan Control. Direct replacement part for Many Carrier, Bryant, Payne, and Day & Night Furnaces.

Includes two Hi Temp Ceramic Wire Nuts. Length sensor offset: 1-9/16 inch. Hot surface ignitor, fits brand Carrier, For Use With Universal' Made in USA.

Carrier LH680014 Flame Sensor

Replaces part numbers: lh33zs001, lh33zs003, lh33zs002, and LH33ZS004. China. Made in USA. The model number and name for the following item is: Temperature Equipment Co LH680014 Flame Sensor. Robust Push Terminals. This is a brand new OEM Furnace Hot Surface Ignitor. Japan. Length sensor offset: 1-9/16 inch. This is a genuine replacement part.

Direct replacement part for Many Carrier, Payne, Bryant, and Day & Night Furnaces. Includes two Hi Temp Ceramic Wire Nuts. Angle sensor offset degrees: 90 This is a genuine Replacement Part. Duralight Two Year Warranty. Common-Sense LEDs. Variable-Speed Fan Control. Clean, Professional Installation. Brand Name: Carrier.

Termination: 1/4 inch male quick connect. Manufacturer Model # Lh680014. Length - mounting flange To Sensor Tip Inches: 2-1/2.