Made from durable alloy steel with a sand-blasted finish for strength and clear imprints, even over time.
ImpressArt 1 Pound Metal Stamping Hammer
. Impressart's brass 1 pound metal stamping hammer was designed for metal stamping. Its scaled down ergonomic handle makes the hammer easy to handle and ensures force and accuracy. With a smaller, it provides easy handling and precision striking. Impressart's metal stamping hammer is the first hammer ever to be designed specifically for metal stamping.
Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank.
Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! This prevents double impressions and also provides longevity to your stamps and steel punches. Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long.
Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing.
JT34443SB - SE 4" x ¾" x 4" Steel Bench Block
Impressart's brass 1 pound metal stamping hammer was designed for metal stamping. Use this must-have tool in any craft or hobby capacity such as hammering, texturing, riveting, letter imprinting, and much more. The head is firmly attached to the handle. All surfaces are ground flat, hardened, and smoothly polished.
Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. Se is proud to present our premium quality 4” x ¾” x 4” Steel Bench Block—a classic jeweler’s tool to help protect your workbench from wear and tear, and produce better results.
This prevents double impressions and also provides longevity to your stamps and steel punches. Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing.
Beadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-Inch
Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing. Contains one 4x4x1/2 inch Bench Block. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time.
This hammer is great for the beginner and intermediate stamper. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.
The ideal surface for letter imprinting; riveting; texturing and hammering- you never have to worry about marring your craft table again! This package contains one 4x4x1/2 inch Bench Block. Dimensions: 4" x 3/4" x 4". All surfaces are ground flat, hardened, and smoothly polished.
Stamping Blank Tags, 1 Inch Round with Hole Aluminum 0.06 Inch Thickness Blanks Tags 100 Pieces
9 mm thickness: 006 inch/ 1. 5 mm impressart's brass 1 pound metal stamping hammer was designed for metal stamping. Range of uses: the stamping blank tags are good for making sign, can be written or engraved text patterns for decoration, pendant, the surface is blank, jewelry diy, or hang the stamping charms to your personalized bracelet, necklace or earrings.
All surfaces are ground flat, hardened, and smoothly polished. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank.
Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Good material: made of aluminum material, bright silver color, also can be hammered, or you could also use them as bails, dangles, use them as charms, you can stamp them, inked, textured, stamped, the front and back wiredrawing process with protective film, pierced and so on.
For chasing, laying out, flattening, shaping, and stamping metal and other hard material.
ImpressArt Stamp Straight Tape
Stamping tags: the diameter of this stamp tag is 1 inch/ 25 mm, convenient to adopt the tap method, the hole diameter is 0075 inch/ 1. 9 mm, thickness is 006 inch/ 1. 5 mm, blank design is great for stamping to leave imprint. Protective film: the metal tag has a protective cover in the front and back surface, and will leave a very nice, easy to be peeled off, clean and scratch-free surface for stamping into.
Sturdy quality: the blank metal tags are made of aluminum, take a stamp clearly and easily, lightweight and easy to use, with a good polish have a luster similar to sterling silver, will not be easily bent. You will receive: aluminum stamping blank tags are in 50, which will meet your various needs; Note: metal products, 150 pieces for you to choose, 100, pointed edges, please use with caution.
Wide applications: round metal key tags are great for making sign, pendant, or you could also use them as necklaces, pendants, charms, jewelry diy, dangles, bracelets and more. Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters.
TEKTON 6610 5/32-Inch Letter and Number Stamp Set, 36-Piece
With a smaller, it provides easy handling and precision striking. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Permanently imprint metal, leather, wood, plastic, and many other items using the TEKTON Letter and Number Stamp Set.
Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. Never mar your craft table again. Stamping tags: the diameter of this stamp tag is 1 inch/ 25 mm, convenient to adopt the tap method, the hole diameter is 0075 inch/ 1.
9 mm, thickness is 006 inch/ 1. 5 mm, blank design is great for stamping to leave imprint. Protective film: the metal tag has a protective cover in the front and back surface, easy to be peeled off, and will leave a very nice, clean and scratch-free surface for stamping into.
ImpressArt Metal Stamp Enamel Marker, Black Acrylic Ink
An essential metal stamping tool. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. With a smaller, it provides easy handling and precision striking. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, scaled down grip, every single time.
Impressart's new stamp enamel marker is an acrylic ink used to darken stamped impressions so your design will be seen clearly. This hammer is great for the beginner and intermediate stamper. The ideal surface for letter imprinting; riveting; texturing and hammering. Hrc 44-46. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank.
Dimensions: 4" x 3/4" x 4". Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry.
Number and Letter Stamp Set 36 Piece Punch Set/A-Z & 0-9 Industrial Grade Hardened Carbon Steel Metal - Perfect for Imprinting Metal, Wood, Plastic, Leather, More! - 1/8" 3mm Characters
9 mm, thickness is 006 inch/ 1. 5 mm, blank design is great for stamping to leave imprint. Protective film: the metal tag has a protective cover in the front and back surface, easy to be peeled off, and will leave a very nice, clean and scratch-free surface for stamping into. Sturdy quality: the blank metal tags are made of aluminum, take a stamp clearly and easily, lightweight and easy to use, with a good polish have a luster similar to sterling silver, will not be easily bent.
You will receive: aluminum stamping blank tags are in 50, pointed edges, 150 pieces for you to choose, 100, which will meet your various needs; Note: metal products, please use with caution. Wide applications: round metal key tags are great for making sign, pendant, dangles, pendants, jewelry diy, charms, or you could also use them as necklaces, bracelets and more.
Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. Includes uppercase letters A-Z, & character, and numerals 0-9. Permanently imprints metal, wood, plastic, and leather.
1/8 Inch 3mm Letter and Number Stamp Set 36pcs 40Cr Alloy Steel Metal Stamp Number & Letter Punch Set in a Wooden case
Sturdy quality: the blank metal tags are made of aluminum, with a good polish have a luster similar to sterling silver, take a stamp clearly and easily, lightweight and easy to use, will not be easily bent. You will receive: aluminum stamping blank tags are in 50, 150 pieces for you to choose, 100, which will meet your various needs; Note: metal products, pointed edges, please use with caution.
Wide applications: round metal key tags are great for making sign, or you could also use them as necklaces, pendants, jewelry diy, dangles, pendant, charms, bracelets and more. Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. Includes uppercase letters A-Z, & character, and numerals 0-9.
Permanently imprints metal, plastic, wood, and leather. Made from alloy steel for longer life. Indexed wood box keeps stamps organized.
Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.
36 piece set - 26 uppercase letters A through Z and 10 Numbers 0-9. Dimensions: 4" x 3/4" x 4". Designed to last over 10, 000 strikes - Hardened Carbon Steel Strength, Incredibly Durable and Long Lasting! The hammer can be used on a standard work table but we highly suggest using a small anvil or steel bench block.
Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Also works great for flattening wire for jewelry making.
For chasing, shaping, flattening, laying out, and stamping metal and other hard material. Made of solid high carbon steel for resistance to dents and scratches. With a smaller, it provides easy handling and precision striking. The brass head of this hammer provides a soft but strong striking surface elimination double impressions.